Brother ADS-1000W User Manual page 141

Scan Using the Control Panel
1
Choose Network in Scan to FTP/Network from the Scan tab. Click Submit.
2
Choose the Profile you want to configure in Scan to FTP/Network Profile.
3
Enter the name that you want to use for the Scan to Network profile. This name will be displayed on the
LCD of the machine and can be up to 15 characters.
4
The Host Address is the domain name of the CIFS server. Enter the Host Address (for example
mypc.example.com) (up to 64 characters) or the IP address (for example 192.23.56.189).
5
Enter the destination folder where your document will be stored on the CIFS server (for example
brother\abc) (up to 60 characters).
6
Choose the file name you want to use for the scanned document. You can choose from seven preset
and two user defined file names. The file name that will be used for your document will be the file name
you selected plus the last 6 digits of the scanner counter plus the file extension (for example,
Estimate_098765.pdf).
7
Choose the quality, file type and document size you want to use for the scanned data. The following
settings can be changed.
Setting Options
Quality Color 150 dpi
Color 200 dpi
Color 300 dpi
Color 600 dpi
B&W 150 dpi
B&W 200 dpi
B&W 300 dpi
B&W 600 dpi
Auto 150 dpi
Auto 200 dpi
Auto 300 dpi
User Select
(ADS-1500W only)
File Type PDF
TIFF
JPEG
User Select
(ADS-1500W only)
Description
 You can select a scanning quality from the Quality drop-down list.
Higher qualities take more memory and transfer time, but produce a
finer scanned image.
 If you select User Select, you must select the setting from the
Control Panel of the machine.
 You can select the file type you want to use for the scanned data.
You can select PDF or JPEG when you select Color in Quality.

 You can select PDF or TIFF when you select B&W in Quality.
 You can select PDF when you select Auto in Quality.
 If you select User Select, you must select the setting from the
Control Panel of the machine.
6
127