Brother ADS-1000W User Manual page 84

Scan Using Your Computer
Setting Description
Contrast Adjust the setting (-50 to 50) to get the best image. The
default value of 0 represents an average and is usually
suitable for most images. You can increase or decrease
the contrast level by moving the slider to the right or left.
An increase emphasizes dark and light areas of the
image, while a decrease reveals more details in gray
areas. You can also enter a value in the box to set the
Contrast.
NOTE
The Contrast setting is only available when setting
Scan Type to Auto, Gray (Error Diffusion),
True Gray or 24bit Color.
Continuous Lets you scan multiple pages. After the page is scanned,
Scanning you can select to continue scanning or finish. Using this
method, you can scan more pages than the maximum
capacity of the document feeder.
2-sided If you check this box, the machine scans both sides of
Scanning the document. When using the automatic 2-sided
(duplex) scan feature, you must select
Long-edge binding or Short-edge binding depending
on the layout of your original to make sure that the data
file created appears correctly in the scanned document.
NOTE
The 2-sided (duplex) scanning feature is available
with lengths up to Legal size.
Plastic Card Lets you scan cards, such as driver's licenses or
Mode insurance cards, using these automatic settings:
 Resolution: 600 x 600 dpi
 Document Size: 2 in 1 (Auto)
 2-sided Scanning: On (Short-edge binding)
 Auto Deskew: On
 Auto Image Rotation: Off
NOTE
• If you want to scan a plastic card with different settings,
set Plastic Card Mode to off and Resolution to
600 dpi.
• Load only one plastic card at a time.
Default Restore all settings to their factory default values.
Applicable Feature
Image OCR E-mail
Yes Yes Yes
Yes Yes Yes
Yes Yes Yes
Yes Yes Yes
Yes Yes Yes
File Print
Yes Yes
5
Yes Yes
Yes Yes
Yes Yes
Yes Yes
70