Table of Contents
Advertisement
Product Safety Guide
Wiring information (U.K. only)
If the fuse in the plug needs replacing, use an ASTA
approved fuse complying with BS1362 with the same
rating as the original. Always replace the fuse cover
after changing.
The machine is fitted with a moulded AC plug that
should not need replacing under normal operation.
If the AC cord is damaged, use a new cord of the
correct rating.
If in doubt contact a qualified electrician.
Declaration of Conformity
(Europe only)
We, Brother Industries, Ltd.
15-1 Naeshiro-cho, Mizuho-ku, Nagoya 467-8561 Japan
declare that this product is in conformity with the essential
requirements of all relevant directives and regulations
applied within the European Community.
The Declaration of Conformity (DoC) can be
downloaded from the Brother Solutions Center.
Visit support.brother.com/manuals and:
-> click "Manuals"
-> select your model
-> click "Declaration of Conformity"
-> click "Download"
Your Declaration will be downloaded as a PDF file.
Radio interference
This product complies with EN55022 (CISPR
Publication 22)/Class B. When connecting the
machine to a computer, ensure that you use a
USB cable that does not exceed 2 m in length.
Information for compliance
with Commission
Regulation 801/2013
Power consumption*
(Networked Standby mode)
* All network ports activated and connected
12
PDS-5000F PDS-6000F
2.0 W
2.0 W
Recycling information in
accordance with the WEEE
and Battery Directives
Product mark
European Union only
The product/battery is marked with one of the above
recycling symbols. These symbols indicate that at the
end of the life of the product/battery, you should
dispose of it separately at an appropriate collection
point and not place it in the normal domestic waste
stream.
Battery mark
Advertisement
Table of Contents
