Precautions - Icom iF5062D Instruction Manual

PRECAUTIONS

RWARNING! NEVER
AC outlet. This may pose a fire hazard or result in an electric
shock.
RWARNING! NEVER
power source of more than 16 V DC. This could cause a fire
or damage the transceiver.
RWARNING! NEVER
polarity when connecting to a power source. This could cause
a fire or damage the transceiver.
RWARNING! NEVER
tween the DC plug and fuse holder. If an incorrect connection
is made after cutting, the transceiver might be damaged.
CAUTION: NEVER
place the transceiver where normal
operation of the vehicle may be hindered or where it could
cause bodily injury.
CAUTION: NEVER
allow children to touch the trans-
ceiver.
CAUTION: NEVER
expose the transceiver to rain,
snow or any liquids.
connect the transceiver to an
connect the transceiver to a
reverse the DC power cable
cut the DC power cable be-
USE
the specified microphone only. Other microphones
have different pin assignments and may damage the trans-
ceiver.
DO NOT
use or place the transceiver in areas with tem-
peratures below –25°C or above +55°C, or in areas subject to
direct sunlight, such as the dashboard.
DO NOT
operate the transceiver without running the ve-
hicle's engine. The vehicle's battery will quickly run out when
the transceiver transmits while the vehicle's engine is OFF.
DO NOT
place the transceiver in excessively dusty envi-
ronments.
DO NOT
place the transceiver against walls. Otherwise
heat dissipation will be obstructed.
DO NOT
use harsh solvents such as benzine or alcohol
when cleaning, as they damage the transceiver surfaces.
BE CAREFUL!
The transceiver will become hot when
operating continuously for long periods.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
ii