User Set Mode; Scrambler Function; Stun Function - Icom iF5062D Instruction Manual

2
BASIC OPERATION

■ User Set mode

The User Set mode allows you to set seldom-changed set-
tings, and you can "customize" the transceiver operation to
suit your preferences and operating style.
Entering the User Set mode:
q Hold down [User Set Mode] for 1 second to enter the User
Set mode.
w Push [User Set Mode] several times to select the appro-
priate item.
Then push [CH Up] or [CH Down] to set the desired level
or option.
• In the User set mode, the selectable items are preset by your
dealer. The presetable Set mode items are Backlight, LCD
Contrast, Beep, Beep Level, Ringer Level, SQL Level, AF
Min Level, Mic Gain, Battery Voltage, Horn, Signal Moni,
Lone Worker and System Info.
e Hold down [User Set Mode] for 1 second again to exit the
User Set mode.
13

■ Scrambler function

The Voice Scrambler function provides private communica-
tion between stations. All versions have a built-in frequency
inversion type scrambler. Moreover, the optional Rolling or
Non-rolling type can be used.
➥ Push [Scrambler] to turn the Voice Scrambler function ON
or OFF.
• " " appears when the function is ON.

■ Stun function

The dispatcher can send a signal that will stun, kill or revive
your transceiver.
When a Stun command is received, the transceiver becomes
unusable. In that case, receiving a Revive command or input-
ting the password* (p. 9) is necessary to operate the trans-
ceiver again.
When a Kill command is received, the transceiver becomes
unusable (the transceiver switches to the cloning required
condition). In that case, cloning the transceiver is necessary
to operate the transceiver again.
* Depending on the pre-programmed settings.
See the operating guide for details of the Stun function
with the BIIS and dPMR system operations. Ask your
dealer for details.