Spanning-Tree Mst Hello-Time - Supermicro SSE-G48-TG4 Reference Manual

Super Micro Intelligent Switch Command Line Interface User Guide

9.18 spanning-tree mst hello-time

This command sets the port based hello timer value and the no form of the command sets the
port based hello timer value to its default.
spanning-tree mst hello-time<value(1-10)>
no spanning-tree mst hello-time
Mode
Interface Configuration Mode
Defaults
2 seconds
Example
SMIS(config-if)#spanning-tree mst hello-time 5
On changing the spanning-tree mst hello-time value, all spanning-tree instances active
on the interface are affected.
Related Command
show spanning-tree mst - Port Specific Configuration - Displays multiple
spanning tree port specific configurations
Release : 1.1f 214 / 985