Vrrp - Text-Authentication - Supermicro SSE-G48-TG4 Reference Manual

Super Micro Intelligent Switch Command Line Interface User Guide

24.6 vrrp - text-authentication

This command sets the authentication type for the virtual router to simple password. The no form
of the command sets the authentication type for the virtual router to none.
vrrp <vrid(1-255)> text-authentication <password>
no vrrp <vrid(1-255)> text-authentication
Syntax Description
vrid - Virtual Router ID
textauthentication - Authentication password
Mode
VRRP Interface Configuration Mode
Example
SMIS(config-vrrp-if)# vrrp 4 text-authentication abcdefgh
The authentication password can be alphanumeric characters up to 8 digits.
The command vrrp <vrid(1-255)> ipv4 <ip address> must be entered for the current
interface (with the proper vrid) before the execution of this command.
Related Commands
router vrrp – Enables VRRP in the router
show vrrp – Displays the VRRP status information
Release : 1.1f 613 / 985