Authorized-Manager Ip-Source - Supermicro SSE-G48-TG4 Reference Manual

Super Micro Intelligent Switch Command Line Interface User Guide

3.18 authorized-manager ip-source

This command configures an IP authorized manager and the no form of the command removes
manager from authorized managers list.
authorized-manager ip-source <ip-address> [{<subnet-mask> | /
<prefixlength(1-32)>}] [interface [<interface-type <0/a-b, 0/c, ...>]
[<interfacetype <0/a-b, 0/c, ...>]] [vlan <a,b or a-b or a,b,c-d>]
[cpu0] [service [snmp] [telnet] [http] [https] [ssh]]
no authorized-manager ip-source < ip-address > [{<subnet-mask > | /
<prefixlength(1-32)>}]
Syntax Description
ip-address - Specifies either the Network or Host address
subnet-mask - IP address mask to be applied
prefix-length - Prefix Length
interface - Valid interfaces include physical ports (including type, slot, and port number)
vlan - The VLANs in which the IP authorized manager can reside
cpu0 - Out of Band Management Interface
service - Indicates service type. Can be one of the following: telnet, ssh, http, https or snmp
Mode
Global Configuration Mode
Defaults
All services are allowed for the configured manager
Example
SMIS(config)# authorized-manager ip-source 10.203.113.5
255.255.255.255 interface gigabitethernet 0/1 vlan 1 service
snmp
An address 0.0.0.0 indicates 'Any Manager'."
Related Command
show authorized-managers - Displays the configured authorized managers
Release : 1.1f 55 / 985