Set-To-Set Messaging - Nortel M3905 User Manual

Set-to-Set Messaging

Set-to-Set Messaging
With the Set-to-Set Messaging application activated, an internal caller using an
M3903, M3904, or M3905 receives a quick visual message, which you have
selected, whenever they dial your telephone number. The length of your message
is limited to 24 characters. The message is entered through the dial pad keys
using a process similar to the one used for entering names in the Personal
Directory. Your network administrator may provide access to a list of up to ten
messages which you may customize and select as your current set-to-set message.
Only one message at a time may be customized and only one message can be
stored in your telephone's memory.
You can check your Call Log to determine whether or not a caller was sent the
set-to-set message. A
saw your message.
To access Set-to-Set Messaging:
To edit the currently stored message,
or to create a new message:
88
will appear beside the call log entry of the callers who
1. Press the
2. From the
Navigation
3. Press the
The
indicating the status of the feature (on
or off) and whether or not a message
is stored (defined) in memory.
Note: If you have activated password
protection on your Directory/Log, you will
need to enter your password to continue.
1. Press the
Applications
Applications
Keys to highlight
.
Select Key.
Set-Set Msg screen appears
Edit Key.
Key.
menu, use the