Use Speed Call - Nortel M3905 User Manual

Use Speed Call

The Speed Call feature allows you to automatically dial frequently called numbers
by entering a one, two, or three digit code. Contact your network administrator to
determine the capacity of your Speed Call list.
A telephone designated as a Speed Call Controller can program or edit the Speed
Call list. This feature must be enabled by your network administrator.
To store or change a Speed Call
number:
2. Press the Individual Line
again.
The last number you dialed is
automatically redialed.
1. Press the Speed Call Controller
The screen displays
.
2. a one, two, or three digit code.
Dial
Use the
Delete
mistake. Use the
the screen without storing a speed call
number.
Note: A dash is automatically inserted
after the required number of digits have
been entered.
3. Dial the associated telephone number.
Use the
Delete
mistake. Use the
the screen without storing a speed call
number.
Note 1: Dial the access code (if required)
followed by the internal, external, or
long-distance telephone number.
Note 2: Press the Pause Key to insert a 1.5
second pause in the dialing string.
4. Press the
Done
and number.
Make a call
(DN) Key
Key.
Key if you make a
Cancel Key to leave
Key if you make a
Key to leave
Cancel
Key to save the code
39