Set-To-Set Messaging - Nortel M3902 Quick Reference Manual

Set-to-Set Messaging

Set-to-Set Messaging
With the Set-to-Set Messaging application activated (available on the M3903
and M3904), an internal caller using an M3903 or M3904 telephone receives a
quick visual message, which you have selected, whenever they dial your
telephone number. The length of your message is limited to 24 characters. The
message is entered through the dial pad keys using a process similar to the one
used for entering names in the M3904's Personal Directory. Only one message
can be stored in your telephone's memory.
You can check your Call Log to determine whether or not a caller was sent the
set-to-set message. A
entry of the callers who saw your message. Note: This feature is not available on
the Meridian SL-100.
To activate Set-to-Set Messaging:
/
Applications
Set to Set Messaging
Select
Edit
46
(M3903) or
* * * *
1. Press the
2. From the
3. Press the
Note: On the M3904, if you have
activated password protection on your
Directory/Log, you will need to enter your
password to continue.
4. Press the
(M3904) will appear beside the call log
Applications
Applications
Navigation Keys to highlight Set to
Set Messaging.
Select
Message screen appears indicating
the status of the feature (on or off) and
whether or not a message is stored
(defined) in memory.
Edit Key to enter a new
message or edit the stored message.
Key.
menu, use the
Key. The
Set-Set