Dispensing Cappuccino With The Professional Cappuccino Frother - Jura IMPRESSA F505 Instructions For Use Manual

You can adjust the steam dispensing time individually by turning
the Rotary Switch (1) until the required SEC are displayed on
the screen.
For example, 35 SEC
If you do not change the steam dispensing time with the Rotary
Switch (1), the machine will set the steam quantity according to
the previously used settings.
While drawing off steam, STEAM is shown on the display.
Once the desired steam quantity has been reached, CLOSE TAP
appears on the display.
Close the steam/hot water draw-off valve (14).
STEAM
READY
The machine is ready to dispense steam as long as STEAM
READY appears on the display.
Due to the system design, some steam may be released
before the tap is closed.
Steam dispensing can be stopped at any time by closing the
steam/hot water draw-off valve (13).
13. Dispensing Cappuccino with the
Professional Cappuccino Frother
Cappuccino consists of one-third each of espresso, hot milk
and milk foam. The Professional Cappuccino Frother (15) is
used for preparing the milk portion.
When steam is drawn, a vacuum is generated, which the
Professional Cappuccino Frother (15) uses to draw milk and
produce the milk foam.
You can also heat up milk by turning the selector lever on
the Professional Cappuccino Frother to the Milk position
(Fig. 20).
To avoid malfunctions, the Professional Cappuccino Frother
(15) must be cleaned regularly.
Make sure that the nozzle is correctly fitted. If the nozzle
becomes blocked with particles of milk residue or is incor-
rectly assembled, the nozzle may disengage and come off,
when the frother is used.
Before using the Professional Cappuccino Frother for the first
time, remove the protective cover from the nozzle (Fig. 6). The
protective cover is used only during transport to protect the noz-
zle against contaminant ingress.
Take the milk pipe out of the Welcome Pack and connect it to
the Professional Cappuccino Frother.
Insert the other end of the milk pipe into a milk carton or con-
nect it to a milk container (Fig. 7).
Place a cup under the Professional Cappuccino Frother (Fig. 7).
The high-quality stainless steel vacuum milk container is a
practical addition for all lovers of milk specialities. It keeps
the milk cool throughout the day and perfectly matches the
design of your IMPRESSA.
All original JURA accessories are available from stockists.
Turn the selector lever on the Professional Cappuccino Frother to
the Milk Foam position (Fig. 18).
READY
Press the steam pre-selection key
HEATING
STEAM
READY
To draw off steam, open the steam/hot water draw-off valve
(Fig. 13). The milk foam will be prepared.
(8).
13
E