Page 5
Control elements A) Display dialog system B) Symbols (navigation in programming mode) C) Large cup D) Coffee E) Espresso F) Start (to start the draw-off operation) G) Coffee strength «mild» H) Coffee strength «Normal» Coffee strength «strong» 1 Programming key 2 Selection key for pre-ground coffee 3 Draw-off key 1 cup 4 Draw-off key 2 cups...
Contents 13. Programming ..........page 15 1. Description of control panel ......page 7 13.1 Programming the filter ......page 16 2. Safety information ..........page 7 13.2 Programming the water hardness....page 16 2.1 Warning..........page 7 13.3 Programming the aroma INTENSIVE 2.2 Precautions ..........page 7 or STANDARD........page 16 2.3 Power Switch ..........page 8 13.4 Programming the temperature ....page 16...
You will also find useful tips on operation and maintenance never touch the machine when your hands are wet. of your IMPRESSA on the website at www.jura.com. Don’t forget to check out the Knowledge Builder our ani- Place the IMPRESSA on a firm, level base that is resistant to mated operating instructions.
JURA coffee machine is not suitable for coffee beans We recommend that you switch off your IMPRESSA with which were treated, during or after roasting, with additives the power switch (21) if you intend not to use the machine (e.g.
HELLO, MACHINE HEATING UP 1° German hardness is equivalent to 1.79° French hardness. FILL SYSTEM / WATER PORTION Place a receptacle under the Professional Cappuccino Frother The coffee machine has 5 hardness degrees which can be used and (14) (Fig. 14). are displayed while you are adjusting the water hardness.
NO FILTER Press symbol until the following message is displayed: Press symbol , NO flashes on the display. WATER HARDNESS 3 Press symbol , you will hear an acoustic signal and the Press symbol until the following message is displayed: hardness degree flashes.
8. Drawing off coffee INSTALL FILTER / WATER PORTION Fold up the cartridge holder. Insert the filter cartridge in the You can change the selected product at any time by pressing water tank (Fig. 4) the symbols before starting the operation by pressing Close the cartridge holder until it engages audibly.
If you press the draw-off key unintentionally, you can stop Press ( ) to select the strength of your espresso. the operation by pressing the maintenance key. Your coffee ESPRESSO STRONG machine will carry out a rinsing operation. Press symbol ESPRESSO STRONG.
Place a cup under the hot water jet (15). STEAM PORTION. Your product is being prepared. Press water draw-off key PLEASE SELECT WATER PORTION You can also abort the dispensing, by pressing the steam The programmed portion is being prepared. You can stop the portion draw-off button early.
Turn the selector switch of the Professional Cappuccino mally suited to the design of your IMPRESSA. Frother (14) to the milk range (Fig. 19). All original JURA accessories can be obtained from the The procedure for dispensing hot milk is the same as the specialist shop.
You can obtain the JURA Auto-Cappuccino Cleaner from Cleaning of the Professional Cappuccino Frother (14) is now the specialist shop. complete, your IMPRESSA is ready for use. Place a receptacle under the Professional Cappuccino Frother 12. Switching off the coffee machine (14) (Fig.
13.4 Programming the temperature 13.1 Programming the filter Use the key to switch on the coffee machine. Refer to Chapter 6.1 «Inserting the filter». WWW. IMPRESSA-F-LINE.COM 13.2 Programming the water hardness HELLO, MACHINE HEATING UP PRESS MAINTENANCE Refer to Chapter 5 «Adjusting the water hardness». MACHINE RINSING PLEASE SELECT 13.3 Programming the aroma INTENSIVE or...
1 CUP STRONG SELECT PRODUCT Select the product, the water quantity of which you want to Press symbol to save the new settings. programme ( 1 CUP 180 ML (for example) COFFEE 90 ML Use the symbols to reach the next programming stage or Press symbol , the value flashes.
13.8 Programming the water portion Press programming key until you hear an acoustic signal. Press symbol until the following message is displayed: Use the key to switch on the coffee machine. TIME —:— WWW. IMPRESSA-F-LINE.COM Press symbol , you will hear an acoustic signal and —:— HELLO, MACHINE HEATING UP flashes.
13.12 Cup counter Use the symbols to select the hours and confirm by pressing This function is available with the following products: Use symbols to adjust the minutes and confirm by In Aroma Select via symbols and via the pre- pressing .
Your coffee machine must be switched on. Press symbol , you will hear an acoustic signal and DEUTSCH flashes. Press symbols to select the required language. Carefully take out the drip tray, it is filled with water. Press symbol to save the new settings. NO TRAY LANGUAGE ENGLISH PLEASE SELECT...
Need help?
Do you have a question about the IMPRESSA F90 and is the answer not in the manual?
Questions and answers