Professional Cappuccino Frother; Preparing Cappuccino With The Professional Cappuccino Frother - Jura IMPRESSA XF50 Instructions For Use Manual

For example 25 SEC.
If you do not change the steam preparation time on the Rotary
Switch (1), you prepare the saved amount of steam.
Once the amount of steam is reached, the following message
appears on the display:
CLOSE TAP
Close the steam / hot water draw-off tap (14).
READY
The machine is ready to prepare steam for around 40 sec., then
the machine is reset so that it is ready to brew coffee.
You can prematurely stop steam preparation at any time by
closing the steam / hot water draw-off tap (13).
Due to the system design, some steam may be released before
the tap is closed. There is a danger of scalding.

13. Professional Cappuccino Frother

13.1 Preparing cappuccino with the Professional
Cappuccino Frother
Cappuccino is made up of one third espresso, one third warm
milk and one third milk foam. The Professional Cappuccino
Frother (15) is used for preparing the milk portion.
When steam is drawn off, a negative pressure is created and
this draws milk with the aid of the Professional Cappuccino
Frother (15) and produces milk foam.
You can also heat up milk by turning the selector switch on the
Professional Cappuccino Frother to the Milk position (Fig. 20).
14
To avoid malfunctions, the Professional Cappuccino Frother (15)
must be cleaned regularly.
Make sure that the nozzle is fitted correctly. If the nozzle
becomes blocked with particles of milk residue or is incorrectly
assembled, it may disengage and come off while the frother is
in use.
When using for the first time, remove the protective cover from the
Professional Cappuccino Frother (Fig. 6). The protective cover is
used only during transport to protect the nozzle against contami-
nant ingress.
Remove the milk pipe from the Welcome Pack and connect it to
the Professional Cappuccino Frother.
Insert the other end of the milk pipe into a milk carton or connect
it to a milk container (Fig. 7).
Place a cup under the Professional Cappuccino Frother (Fig. 7).
The high-quality stainless steel container is a practical addition
for all lovers of milk specialities. It keeps the milk cool through-
out the day and is fully in keeping with the design of your
IMPRESSA.
All original JURA accessories are available from stockists.
Turn the selector switch on the Professional Cappuccino Frother to
the Milk Foam position (Fig. 18).
READY
Press the steam preselection button
HEATING
READY
(8).