Drawing Off Steam; Dispensing Cappuccino With The Professional Cappuccino Frother - Jura IMPRESSA F90 Instructions For Use Manual

PLEASE SELECT

10. Drawing off steam

The steam function is used for the preparation of milk foam
and hot milk, as well as for the Professional Cappuccino
Frother (14) cleaning programme.
With the optionally available 2-stage frothing nozzle, liquids
can be heated and frothed using the steam function.
Make sure that the nozzle is correctly fitted when drawing
steam. If the nozzle becomes blocked with particles of milk
residue or is incorrectly assembled, a danger can arise during
use whereby the nozzle may jump off.
Due to the system design, some water will escape at first
when steam is drawn. However, this will not affect the result
in any way.
When drawing steam, spluttering can occur at the start. The
nozzle becomes hot in use. Avoid any direct skin contact.
PLEASE SELECT
PLEASE SELECT
PLEASE SELECT
You can also abort the dispensing, by pressing the steam
portion draw-off button
11. Dispensing Cappuccino with the
Professional Cappuccino Frother
Cappuccino comprises one third each of Espresso, hot milk
and milk foam. You produce the milk portion with the Pro-
fessional Cappuccino Frother (14).
When steam is drawn, a vacuum is produced which, with the
aid of the Professional Cappuccino Frother (14), draws in the
milk and produces milk foam.
To ensure perfect function, the Professional Cappuccino
Frother (14) must be cleaned regularly.
Make sure that the nozzle is correctly fitted. If the nozzle
becomes blocked with particles of milk residue or is incor-
rectly assembled, a danger can arise during use whereby the
nozzle may jump off.
When using for the first time, remove the protective cover from
the Professional Cappuccino Frother (14) (Fig. 9). The protective
cover is used only during transport as protection to prevent the
ingress of contaminated materials.
Remove the milk pipe from the Welcome Pack and connect it to
the Professional Cappuccino Frother (14).
Insert the other end of the milk pipe into a Tetra Pak of milk or
connect it to a milk container (Fig. 11).
Place a cup under the Professional Cappuccino Frother (14)
(Fig. 11).
early.
E
13