Table of Contents
Related Manuals for Jura IMPRESSA F8
Summary of Contents for Jura IMPRESSA F8
- Page 1 IMPRESSA F8 Instructions for Use The Instructions for Use has been awarded the seal of approval by the independent German Technical Inspection Agency, TÜV SÜD, due to its easy-to-understand style, its thoroughness and coverage of safety aspects.
-
Page 2: Table Of Contents
Important information Proper use ..............................6 For your safety ............................... 6 1 Preparing and using for the first time JURA on the Internet ............................10 Setting up the machine ..........................10 Filling the bean container ...........................10 First-time use ..............................10 Determining the water hardness ......................13 Connecting milk ............................14... - Page 3 8 Transport and environmentally friendly disposal Transport / Emptying the system ......................48 Disposal .................................48 9 Technical data 10 Index 11 JURA contact details / Legal information Symbol description Warnings Always take note of any information marked with the words CAUTION or J WARNING WARNING and a warning sign.
-
Page 4: Control Elements
Control elements Control elements Bean container with aroma preservation Filler funnel cover cover Filler funnel for ground coffee Water tank cover Storage compartment cover Water tank Grinder adjustment switch Power switch and mains cable Measuring spoon for ground coffee (back of the machine) Height-adjustable hot-water nozzle Coffee grounds container Connector System... - Page 5 Control elements Top of the machine Front On/Off button Display g Rotary Switch Multi-function buttons (button function depends on what is shown in the display) P button (programming) l Switch for hot water and steam preparation The Connector System permits the use of different cappuccino frothers. These are available ©...
-
Page 6: Important Information
JURA service. If the mains cable of this machine is damaged, it must be repaired either directly by JURA or by an authorised JURA service centre. Make sure that the IMPRESSA and the mains cable are not located close to hot surfaces. - Page 7 The machine contains live parts. If opened, there is a danger of potentially fatal injury. Repairs may only be carried out by authorised JURA service centres, using original spare parts and accessories. To completely and safely disconnect the...
- Page 8 Please only use original JURA maintenance products. Use of products that are not explic- itly recommended by JURA could damage the IMPRESSA. Do not use any coffee beans treated with addi- tives or caramelised coffee beans.
- Page 9 Important information Children aged 8 and over may only operate the machine without supervision if they have been instructed in how to use it safely. Chil- dren must be able to recognise and under- stand the potential dangers arising from incor- rect use.
-
Page 10: Preparing And Using For The First Time
JURA on the Internet Visit us on the Internet. You can download short operating instruc- tions for your machine from the JURA website (www.jura.com). You will also find interesting and up-to-date information on your IMPRESSA and on every aspect of coffee. - Page 11 1 Preparing and using for the first time Precondition: The bean container has been filled. T Insert the mains plug into a power socket. 3 T Switch on the IMPRESSA using the power switch on the back of the machine. ...
- Page 12 1 Preparing and using for the first time T Place a receptacle (at least 300 ml) under the fine foam frother and the coffee spout. l T Turn the switch to the m position. ‘Filter is being rinsed’, water flows out of the fine foam frother.
-
Page 13: Determining The Water Hardness
1 Preparing and using for the first time k T Press the Rotary Switch. ‘Saved’ appears briefly on the display. ‘Fill water tank.’ T Open the water tank cover. T Remove the water tank and rinse it with cold water. T ... -
Page 14: Connecting Milk
1 Preparing and using for the first time Connecting milk Your IMPRESSA creates fine, creamy, feather-light milk foam with a perfect consistency. The most important requirement for frothing milk is a milk temperature of 4–8 °C. We would therefore recom- mend using a milk cooler or a vacuum milk container. T ... -
Page 15: Preparation
– and impairs the taste. We therefore recommend prewarming the cups. The full coffee aroma can develop only in prewarmed cups. You can purchase a JURA cup warmer from your specialised dealer. You can make permanent settings for all products in programming mode (see Chapter 4 ‘Permanent settings in programming mode –... -
Page 16: Ristretto, Espresso And Coffee
2 Preparation Turn the Rotary Switch to bring the product you want into focus. Start preparation by pressing the Rotary Switch or the ‘Prepare’ button. The following additional products are shown in the product selector view: ‘Ristretto’ ‘2 ristretti’ ‘2 espressi’ ‘2 coffees’... -
Page 17: Latte Macchiato, Cappuccino
T Place a cup under the coffee spout and the fine foam frother (Figure: Optional JURA Cool Control Basic 0.6 l). E Ensure that the filling height of the milk is no higher than the milk pipe connection on the fine foam frother. -
Page 18: Milk Foam
T Place a cup under the fine foam frother (figure: Optional JURA Cool Control Basic 0.6 l). E Ensure that the filling height of the milk is no higher than the milk pipe connection on the fine foam frother. -
Page 19: Ground Coffee
2 Preparation l T Turn the switch to the m position. ‘Portion milk foam’ appears and the milk foam is prepared. Preparation stops automatically when the preset amount of steam is reached. ‘Switch close’ y T Turn the switch to the ° position. ‘Please select product’... -
Page 20: Permanently Setting The Amount Of Water For The Cup Size
2 Preparation T Open the cover of the filler funnel for ground coffee. ‘Please add ground coffee’ T Place one level measuring spoon of ground coffee into the filler funnel. T Close the cover of the filler funnel. ‘Please select product’ T ... -
Page 21: Adjusting The Grinder
2 Preparation E You can also permanently set the amount of water for all spe- ciality coffees and hot water in programming mode (see Chapter 4 ‘Permanent settings in programming mode – Adjusting the product settings’). Adjusting the grinder You can adjust the grinder on a continuous scale to suit the degree of roast of your coffee. - Page 22 2 Preparation T Open the storage compartment cover, take out the hot- water nozzle and close the cover again. T Attach the hot-water nozzle to the connector. T Place a cup under the hot-water nozzle. l T Turn the switch to the m position. ‘Hot water’, the preset amount of water flows into the cup.
-
Page 23: Daily Operation
Precondition: Your IMPRESSA is switched on at the power switch. T Place a receptacle under the coffee spout. Q T Press the On/Off button to switch the IMPRESSA on. ‘Welcome to JURA’ ‘Machine is heating’ ‘Machine is rinsing’, the system is rinsed. The rinse stops automatically. -
Page 24: Switching Off
3 Daily operation T Dismantle and rinse the fine foam frother (see Chapter 5 ‘Maintenance – Dismantling and rinsing the fine foam frother’). T Wipe the surface of the machine with a clean, soft, damp cloth (e.g. microfibre cloth). E In the interests of hygiene, we recommend changing the milk pipe on a regular basis (approx. -
Page 25: Permanent Settings In Programming Mode
4 Permanent settings in programming mode 4 Permanent settings in programming mode Press the P button to enter programming mode. You can navigate through the programme items and permanently save the required settings simply by turning the Rotary Switch and using the multi- function buttons. -
Page 26: Product Settings
4 Permanent settings in programming mode Product settings In the programme item ‘Product settings’ (‘3/7’) you can make the following settings: ‘Expert mode’ Set individual settings for all speciality coffees, milk and hot water (see Chapter 4 ‘Permanent settings in programming mode –... -
Page 27: Replacing Products On The Start Screen
4 Permanent settings in programming mode Permanent settings in programming mode always follow the same model. Example: Proceed as follows to change the coffee strength for one coffee from ‘ normal ’ (;;) to ‘strong’ (;;;). Precondition: ‘Please select product’ is displayed. ... -
Page 28: Renaming A Product
4 Permanent settings in programming mode T Press the ‘Expert mode’ button. ‘Expert mode’ T Press the ‘ > ’ button (bottom right) several times until ‘Macchiato’ is displayed. T Press the ‘Macchiato’ button. ‘Macchiato’ g T Press the ‘ > ’... -
Page 29: Automatic Switch-Off
4 Permanent settings in programming mode E By pressing the ‘abc/ABC’ button, you can switch between lower and upper case letters. g T Turn the Rotary Switch until the letter you want is high- lighted. k T Press the Rotary Switch to confirm the letter. T ... -
Page 30: Energy-Saving Mode
4 Permanent settings in programming mode Energy-saving mode In the programme item ‘Machine settings’ (‘4/7’) / ‘Save energy’ can permanently set an energy-saving mode (Energy Save Mode, E.S.M. © ‘Active’ Soon after the last preparation, the IMPRESSA stops heating up. After about 5 minutes the message ‘Energy Save’... -
Page 31: Setting The Water Hardness
4 Permanent settings in programming mode ‘Switch-on rinse’ ‘Manual’: The switch-on rinse must be started manually. ‘Automatic’: The switch-on rinse is started automatically. Example: Proceed as follows to specify that the switch-on rinse should be started manually. Precondition: ‘Please select product’ is displayed. -
Page 32: Display Settings
4 Permanent settings in programming mode g T Turn the Rotary Switch to adjust the water hardness. T Press the ‘Save’ button. ‘Saved’ appears briefly on the display. ‘Maintenance settings’ O T Press the P button to exit programming mode. ‘Please select product’... -
Page 33: Restore Factory Settings
4 Permanent settings in programming mode T Press the ‘Save’ button. ‘Saved’ appears briefly on the display. ‘Machine settings’ O T Press the P button to exit programming mode. ‘Please select product’ Restore factory settings In the programme item ‘Machine settings’... -
Page 34: Querying Information
4 Permanent settings in programming mode T Press the ‘Deutsch’ button. ‘Gespeichert’ appears briefly on the display ‘Geräteeinstellungen’ O T Press the P button to exit programming mode. ‘Bitte wählen’ Querying information In the programme item ‘Information’ (‘7/7’) you can view the follow- ing information: ‘Product counter’: Number of prepared coffee speciality cof-... -
Page 35: Maintenance
5 Maintenance 5 Maintenance Your IMPRESSA has the following integrated maintenance pro- grammes: Rinsing the machine (‘Rinse the coffee system’) Rinsing the fine foam frother (‘Rinse the milk system’) Cleaning the fine foam frother (‘Cappuccino cleaning’) Changing the filter (‘Change the filter’) Cleaning the machine (‘Clean’) Descaling the machine (‘Descale’) (only if filter is not acti-... -
Page 36: Rinsing The Fine Foam Frother
If the wrong cleaning agent is used, the machine could be damaged and/or traces could be left behind in the water. T Use only original JURA maintenance products. E JURA Cappuccino Cleaner is available from specialised dealers. Precondition: ‘Please select product’ is displayed. -
Page 37: Dismantling And Rinsing The Fine Foam Frother
5 Maintenance T Immerse the milk pipe in the receptacle. T Place a receptacle under the fine foam frother. T Press the ‘Next’ button. ‘Cappuccino cleaning’ As soon as the machine has heated up, ‘Switch open’ appears. l T Turn the switch to the m position. ‘Cleaning Cappuccino’... -
Page 38: Inserting And Activating The Filter
T Rinse all the parts of the fine foam frother thoroughly under running water. If there are severely dried-on milk residues, firstly immerse the individual parts in JURA Cappuccino Cleaner and then rinse them thoroughly. T Re-assemble the fine foam frother. -
Page 39: Changing The Filter
5 Maintenance T Insert the CLARIS Blue filter cartridge into the water tank, exerting slight pressure. T Close the filter holder. It will click into place audibly. E After two months, the filter will cease to work. Set the date on the date plate on the filter holder in the water tank. - Page 40 5 Maintenance Precondition: ‘Change the filter’ is displayed. O T Press the P button. ‘Maintenance status’ (‘1/7’) T Press the ‘Change the filter’ button. ‘Change the filter’ T Press the ‘Start’ button. T Press the ‘Start’ button again. ‘Change filter’ T ...
-
Page 41: Cleaning The Machine
‘Add cleaning tablet’. T Open the cover of the filler funnel for ground coffee. T Insert a JURA cleaning tablet into the filler funnel. T Close the cover of the filler funnel. ‘Press the Rotary Switch’ k T Press the Rotary Switch. -
Page 42: Descaling The Machine
T Clean up any splashes immediately. E The descaling programme lasts approximately 40 minutes. E JURA descaling tablets are available from specialised dealers. E If you use a CLARIS Blue filter cartridge and this is activated, you will not be prompted to descale. - Page 43 ‘Agent in tank’ T Remove and empty the water tank. T Completely dissolve the contents of one blister (3 JURA des- caling tablets) in a receptacle holding 500 ml of lukewarm water. This may take several minutes.
-
Page 44: Cleaning The Bean Container
5 Maintenance y T Turn the switch to the ° position. ‘Machine is being descaled’, the descaling operation is con- tinued. The operation is interrupted, ‘Machine is being descaled’. Water flows out of the coffee spout. ‘Empty drip tray’ T Refit the fine foam frother on the Connector System ©... -
Page 45: Display Messages
6 Display messages 6 Display messages Message Cause/Result Action ‘Fill water The water tank is empty. You T Fill the water tank (see Chapter 1 ‘Prepar- tank.’ cannot prepare any products. ing and using for the first time – Filling the water tank’). -
Page 46: Troubleshooting
Grinder is making a There are foreign objects in T Contact customer support in your very loud noise. the grinder. country (see Chapter 11 ‘JURA contact details / Legal information’). - Page 47 Contact customer support in your country (see Chapter 11 ‘JURA contact details / Legal information’). E If you were unable to solve the problem, contact customer support in your country (see Chapter 11 ‘JURA contact details / Legal information’).
-
Page 48: Transport And Environmentally Friendly Disposal
8 Transport and environmentally friendly disposal 8 Transport and environmentally friendly disposal Transport / Emptying the Keep the packaging for your IMPRESSA. It should be used to protect system the machine during transport. In order to protect the IMPRESSA from frost during transport, the system must be emptied. -
Page 49: Technical Data
9 Technical data 9 Technical data Voltage 220–240 V ~, 50 Hz Power 1450 W Conformity mark Energy consumption approx. 6 Wh ‘Save energy’ ‘Active’ Energy consumption approx. 13 Wh ‘Save energy’ ‘Inactive’ Pump pressure static, max. 15 bar Holding capacity of water tank 1.9 l Holding capacity of bean container 310 g Holding capacity of coffee grounds max. -
Page 50: Index
10 Index 10 Index Cover Filler funnel for ground coffee 4 Addresses 56 Storage compartment 4 Adjusting the product settings 26 Aroma preservation cover Water tank 4 Cup grille 4 Bean container with aroma preservation Customer support 56 cover 4 Automatic switch-off 29 Descaling Machine 42... - Page 51 Instant coffee Hot water 21 Ground coffee 19 Latte macchiato 17 Internet 10 Milk foam 18 Ristretto 16 Two speciality coffees 16 JURA Using the product selector 15 Contact details 56 Preparation options 15 Internet 10 Problems Troubleshooting 46 Language 33...
- Page 52 10 Index Querying information 34 Water hardness Determining the water hardness 13 Setting the water hardness 31 Renaming a product 28 Water tank 4 Rinses Descaling 44 Cappuccino frother rinsing 36 Filling 14 Rinsing Website 10 Fine foam frother 36 Machine 35 Ristretto 16 2 ristretti 16...
-
Page 56: Jura Contact Details / Legal Information
Art. 71428/F8/en/201312 11 JURA contact details / Legal information 11 JURA contact details / Legal information JURA Elektroapparate AG Kaffeeweltstrasse 10 CH-4626 Niederbuchsiten Tel. +41 (0)62 38 98 233 @ You will find additional contact details for your country at www.jura.com. Directives The machine complies with the following directives: 2006/95/EC –...