D Tx code channel selection
If the transceiver has the [TX CH] key, display can be toggled
with the operating channel number (or name) and Tx code
channel number (or name). When the Tx code channel num-
ber (or name) is displayed, the [
code channel.
TO SELECT A TX CHANNEL:
➀
Push [TX CH]—a Tx code channel appears.
➁
Push [
]/[
] to select the desired Tx code channel.
➂
Push [CALL] to transmit the selected Tx code.
➃
Push [TX CH] again to return to the channel display.
FOR TX CODE CHANNEL TYPE:
When the [STN UP] and/or [STN DN] are available on the
transceiver, a TX code channel may appear constantly. In this
case, these keys select the TX code channel directly.
]/[
] key selects the Tx
D Tx code number selection
If the transceiver has the [CODE] key, Tx code contents can
be changed within the allowable digits.
TO SELECT A TX CODE:
➀
Push [CODE]—a Tx code number appears and an allow-
able digit flashes.
➁
Enter the desired number directly using the keypad.
• Repeat from step ➀ when you want to enter another Tx code.
➂
Push [CALL] to transmit the selected Tx code.
D DTMF transmission
If the transceiver has the [CODE] key, the automatic DTMF
transmission function is available. Up to 10 DTMF channels
may be available.
TO SELECT A TX CODE:
➀
Push [DTMF]—a DTMF channel appears.
➁
Push [
]/[
] to select the desired DTMF channel.
➂
Push and hold [DTMF] to transmit the DTMF code in the
selected DTMF channel.
2
OPERATION
9