Table of Contents
Advertisement
DO NOT
connect the transceiver to a power source using
reverse polarity. This connection will not only blow fuses but
also may damage the transceiver.
DO NOT
use or place the transceiver in areas with tem-
peratures below –20°C or above +55°C or, in areas subject
to direct sunlight, such as the dashboard.
AVOID
operating the transceiver without running the vehi-
cle's engine. The vehicle's battery will quickly run out if the
transceiver is in transmission while the vehicle's engine is off.
AVOID
placing the transceiver is excessively dusty envi-
ronments.
AVOID
placing the transceiver against walls. This will ob-
struct heat dissipation.
AVOID
the use of chemical agents such as benzine or al-
cohol when cleaning, as they can damage the transceiver's
surfaces.
BE CAREFUL!
The transceiver will become hot when
operating continuously for long periods.
iii
Advertisement
Table of Contents
Need help?
Do you have a question about the IC-F1610 and is the answer not in the manual?
Questions and answers