Audio/Usb Board - HP Pavilion 11 x2 PC Maintenance And Service Manual

3. Remove the power connector cable (3).
Reverse this procedure to install the power connector cable.

Audio/USB board

Description
Audio/USB board (includes audio-out/audio-in combo jack and USB 2.0 port)
Before removing the audio/USB board, follow these steps:
1. Turn off the tablet and keyboard base. If you are unsure whether the tablet and keyboard base
are off or in Hibernation, turn the tablet on, and then shut it down through the operating system.
2. Disconnect the power from the tablet and keyboard base by unplugging the power cord from the
tablet and keyboard base.
3. Disconnect the tablet from the keyboard base.
4. Remove the bottom cover (see
5. Disconnect the keyboard base battery cable from the docking board (see
on page 62).
Bottom cover on page
Keyboard base component replacement procedures
Spare part number
742733-001
61).
Keyboard base battery
69