Tablet Battery - HP Pavilion 11 x2 PC Maintenance And Service Manual

2. Disconnect the display panel cable (2) from the display panel.
Reverse this procedure to install the display panel cable.

Tablet battery

Description
2-cell, 21-Wh, 2.86-Ah, Li-ion battery for use only in the tablet (includes cable)
Before removing the tablet battery, follow these steps:
1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
2. Disconnect the power from the tablet by unplugging the power cord from the tablet.
3. Disconnect all external devices from the tablet.
4. Remove the display enclosure (see
5. Disconnect the tablet battery cable from the system board (see
6. Remove the heat sink (see
WARNING!
replacement battery provided by HP, or a compatible battery purchased from HP.
Heat sink on page
To reduce potential safety issues, use only the battery provided with the tablet, a
Display enclosure on page
46).
Tablet component replacement procedures
Spare part number
722232-005
31).
Sensor board on page 32).
59