Bezel - HP Pavilion 11 x2 PC Maintenance And Service Manual

Pc
Hide thumbs Also See for Pavilion 11 x2 PC:
Table of Contents

Advertisement

Bezel

NOTE:
The bezel spare part kit includes the power connector light pipe and the regulatory label.
Description
Bezel for use only on computer models equipped with the Ralink WLAN module in
the Asia Pacific regions and countries and Japan
Bezel for use only on computer models equipped with the Ralink WLAN module in Europe, the
Middle East, and Africa
Bezel for use only on computer models equipped with the Ralink WLAN module in Latin America
Bezel for use only on computer models equipped with the Ralink WLAN module in
North America
Bezel for use only on computer models equipped with the Ralink WLAN module in
the People's Republic of China
Bezel for use only on computer models equipped with the Ralink WLAN module in South Korea
and Taiwan
Bezel for use only on computer models equipped with the Intel WLAN module in the Asia Pacific
regions and countries and Japan
Bezel for use only on computer models equipped with the Intel WLAN module in Europe, the
Middle East, and Africa
Bezel for use only on computer models equipped with the Intel WLAN module in Latin America
Bezel for use only on computer models equipped with the Intel WLAN module in North America
Bezel for use only on computer models equipped with the Intel WLAN module in
the People's Republic of China
Bezel for use only on computer models equipped with the Intel WLAN module in South Korea
and Taiwan
Before removing the TouchScreen board, follow these steps:
1.
Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
2.
Disconnect the power from the tablet by unplugging the power cord from the tablet.
3.
Disconnect all external devices from the tablet.
4.
Remove the display enclosure (see
5.
Disconnect the tablet battery cable from the system board (see
Remove the bezel:
1.
Remove the eight Phillips PM1.85×4.50 screws (1) and the Phillips PM1.85×5.65 screw (2) that
secure the bezel to the display panel assembly.
50
Chapter 5 Removal and replacement procedures
Display enclosure on page
Spare part number
740200-001
740199-001
742766-001
740198-001
742767-001
740201-001
745776-001
745775-001
745778-001
745774-001
745779-001
745777-001
31).
Sensor board on page
32).

Advertisement

Table of Contents
loading

Table of Contents