Touchscreen Board - HP Pavilion 11 x2 PC Maintenance And Service Manual

Reverse this procedure to install the heat sink.

TouchScreen board

Description
TouchScreen board (includes cable and double-sided adhesive)
Before removing the TouchScreen board, follow these steps:
1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
2. Disconnect the power from the tablet by unplugging the power cord from the tablet.
3. Disconnect all external devices from the tablet.
4. Remove the display enclosure (see
5. Disconnect the tablet battery cable from the system board (see
6. Remove the heat sink (see
48 Chapter 5 Removal and replacement procedures
Display enclosure on page
Heat sink on page 46).
Spare part number
742734-001
31).
Sensor board on page 32).