Speakers - HP Pavilion 11 x2 PC Maintenance And Service Manual

Speakers

Description
Speaker Kit (includes left and right speakers and cables)
Before removing the speakers, follow these steps:
1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
2. Disconnect the power from the tablet by unplugging the power cord from the tablet.
3. Disconnect all external devices from the tablet.
4. Remove the display enclosure (see
5. Disconnect the tablet battery cable from the system board (see
6. Remove the bezel (see
Remove the speakers:
1. Disconnect the speaker cable (1) from the system board.
2. Release the left speaker cable from the clips (2) built into the display panel assembly.
3. Remove the two Phillips PM1.85×3.35 screws (3) that secure the speakers to the display
panel assembly.
4. Remove the speakers (4).
Reverse this procedure to install the speakers.
52 Chapter 5 Removal and replacement procedures
Display enclosure on page
Bezel on page 50).
Spare part number
740193-001
31).
Sensor board on page 32).