Rtc Battery - HP Pavilion 11 x2 PC Maintenance And Service Manual

RTC battery

Description
RTC battery (includes cable and double-sided adhesive)
Before removing the RTC battery, follow these steps:
1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
2. Disconnect the power from the tablet by unplugging the power cord from the tablet.
3. Disconnect all external devices from the tablet.
4. Remove the display enclosure (see
5. Disconnect the tablet battery cable from the system board (see
Remove the RTC battery:
1. Disconnect the RTC battery cable (1) from the system board.
2. Detach the RTC battery (2) from the display panel assembly. (The RTC battery is attached to the
display panel assembly with double-sided tape.)
3. Remove the RTC battery.
Reverse this procedure to install the RTC battery.
Display enclosure on page
Tablet component replacement procedures
Spare part number
741724-001
31).
Sensor board on page 32).
43