3.6.
DOOR ADJUSTMENT
In order for your stove to operate properly, the door should be adjusted periodically to provide an air tight fit.
To adjust:
• Remove the lock pin (spring pin) by pulling and turning it using pliers ("wise grip")
• Turn the handle counter clock wise one turn to increase pressure
• Re-install the lock pin (spring pin) with a small hammer
3.7.
DOOR GASKET MAINTENANCE
It is important to maintain the door gasket in good condition. After a while, the gasket will compress and
might sag; a door adjustment may then be required. If the door adjustment is not sufficient, replace the door
gasket with a genuine one. If the appliance door is not properly sealed, it will be difficult to keep the door
glass clean and combustion gases may leak into the room.
FIGURE 28
FIGURE 29