Enerzone Euromax Owner's Manual page 2

SAFETY PRECAUTIONS 2
INTRODUCTION
Thank you for purchasing the EUROMAX pellet stove. You are now prepared to burn pellet
in the most efficient, convenient way possible. To achieve the safest, most efficient and
1)
most enjoyable performance from your stove, you must do three things: Install it
2) 3)
properly; Operate it correctly; and Maintain it regularly. The purpose of this manual is
to help you do all three.
PLEASE read this entire manual before installation and use of this pellet fuel-burning room
heater. Failure to follow these instructions could result in property damage, bodily injury or
even death.
Keep this manual handy for future reference.
Your Enerzone EUROMAX has been independently tested to ASTM E1509-04 Standard
Specification for Room Heaters, Pellet Fuel Burning Type, UL 1482-2010 and ULC-S627-00
Standard for Solid Fuel Room Heaters, Oregon Administrative Rules for Mobile Homes (814-
23-900 through 814-23-909) and Installation as a Stove Heater.
This pellet stove, when installed, must be electrically grounded in accordance with local
National Electrical Code, ANSI/NFPA 70
codes, or in the absence of local codes, with the
and CSA-C22.1.
We recommend that our pellet hearth products be installed and serviced by professionals
®
who are certified in the United States by NFI (National Fireplace Institute ) or in Canada by
WETT (Wood Energy Technology Transfer) or in Quebec by APC (Association des
Professionnels du Chauffage).
The bottom-feed burner system of this appliance is designed and tested specifically for use
only with four different types of pellets: standard wood pellets, 100% bark pellets,
sawdust/hay mix pellets, and switch grass pellets. This appliance is designed for residential
installation according to current national and local building codes as a freestanding room
heater. It is also approved as a mobile home heater. An outside combustion air source is
mandatory.
The stove will not operate using natural draft or without a power source for the blower
systems and fuel feed system and must not be burned with any type of coal.
This stove is designed to provide the optimum proportions of fuel and air to the fire in order
to burn free of smoke and soot. Any blockage of the air supply to or from the stove will
seriously degrade its performance and will be evidence by a smoking exhaust and a
sooting window. For best operation, the ash content of the pellet fuel should be less than
1% and the calorific value approximately 8,200 BTU/LB. Others fuels with a high ash
content will require a higher level of maintenance and cleaning.
Commercial and industrial installations of the Enerzone EUROMAX should not be used since
operational control is often not well managed in these settings.