Enerzone Euromax Owner's Manual page 34

9. Set the torx of the power driver at 1/3 of its capacity. Install the retainers using the screws
removed in step 2. Start by installing one screw in the certre hole of each retainer, it will help
you position the trims. Make sure the glass does not move and remain centered before
installing the other screws.
overthighten. Once the retainers are secured the tabs should barely touch the glass ...
WARNING: REPLACEMENT GLASS SHOULD ONLY BE PURCHASED FROM A DROLET DEALER (SEE "REPLACEMENT
PARTS'' SECTION). TEMPERED GLASS OR ORDINARY GLASS WILL NOW WITHSTAND THE HIGH
TEMPERATURES OF THE EUROMAX.
Each screw must be snugged against the retainer not