Removal And Replacement Of Gaskets - Enerzone Euromax Owner's Manual

3.10. REMOVAL AND REPLACEMENT OF GASKETS

EXHAUST BLOWER CLEANOUT TRAP GASKET
Step 1:
Open the rear door located to the left of the appliance. Remove all 6 bolts retaining the exhaust blower
cleanout trap. Remove the worn gasket and clean-up the contact surfaces. Keep the bolts for further
instructions.
Step 2:
Remove all 4 bolts retaining the cleanout plate located inside the exhaust blower cage assembly. Clean-up
the dirty area inside the appliance with an ash vacuum. Put back the cleanout plate and its respective bolts in
place.