Enerzone Euromax Owner's Manual page 37

Step 2:
Remove all 8 bolts securing the clean out trap. Remove the worn gasket and clean-up the contact surfaces.
Clean-up the dirty area inside the appliance with an ash vacuum. Apply gasket #21352 from AC09190 on
the clean out trap. Put back in place the clean out trap with its respective bolts.
Step 3:
Remove all 5 bolts retaining the upper clean out trap. Remove the worn gasket and clean-up the contact
surfaces. Clean-up the dirty area inside the appliance with an ash vacuum. Apply gasket #21348 from
AC09190 on the clean out trap. Put back in place the clean out trap with its respective bolts.