What To Do If - Electrolux EE3000010 User Manual

2. Hold the door t (B) on the top edge of
the door at the two sides and push in-
wards to release the clip seal.
3. Pull the door t to the front to remove it.
4. Hold the door glass panels on their top
edge one by one and pull them up out of
the guide
5. Clean the door glass panels.
To install panels follow the procedure in re-
verse. Install the smaller panel first, then the
larger.

WHAT TO DO IF...

WARNING!
Refer to "Safety information" chapter.
Problem
The cooking zones do
not operate
The oven does not heat
up
The oven does not heat
up
The oven lamp does not
operate
Steam and condensa-
tion settle on the food
and in the oven cavity
If you cannot find a solution to the problem yourself, contact your dealer or the service
centre.
The necessary data for the service centre is on the rating plate. The rating plate is on the
front frame of the oven cavity.
We recommend that you write the data here:
Model (MOD.)
Possible cause
Consult the operating instructions for the built-in cooking surface
The oven is not switched on
The fuse in the fuse box is
released
The oven lamp is defective
You left the dish in the
oven for too long
What to do if...
B
Remedy
Switch on the oven (refer to chapter
"Daily use")
Control the fuse. If the fuse is released
more than one time, refer to a quali-
fied electrician.
Replace the oven lamp
Do not leave the dishes in the oven for
longer than 15-20 minutes after the
cooking process ends
.........................................
23