Table of Contents
Advertisement
22
Care and cleaning
Folding down the heating element
1. Remove the shelf support.
2. Hold the heating element with the two
hands at the front
3. Pull it forwards against the spring pres-
sure and out along the support on both
sides.
4. The heating element folds down.
The oven ceiling is ready to clean.
Installing the heating element
1. Install the heating element in opposite
sequence.
Install the heating element correctly on the two sides above the support on the inner
wall of the appliance.
2. Install shelf support.
Oven door and glass panels
To clean the oven door remove it.
CAUTION!
Be careful when you remove the door from the appliance. The door is heavy!
Removing the oven door
1. Open the oven door as far as it goes.
2. Lift up clamping levers (A) on the two
door hinges fully.
3. Close the oven door until the first posi-
tion (angle approximately 45°).
4. Hold of the oven door with one hand on
each side and pull it away from the oven
at an upwards angle.
5. Now you can remove the inner glass
panels and clean them.
To install the door follow the procedure in reverse.
The number of glass panels depends on the model.
CAUTION!
Put the oven door with the outer side down on a soft and level surface to prevent
scratches
Removing and cleaning the door glass panels
1. Remove the oven door.
A
A
Advertisement
Table of Contents
