How To Replace: Lamp; Troubleshooting; What To Do If - Electrolux COP802X User Manual

Hide thumbs Also See for COP802X:
Table of Contents

Advertisement

12.6 How to replace: Lamp

WARNING!
Risk of electric shock.
The lamp can be hot.
Always hold the halogen lamp with a cloth to prevent grease residue from burning on the lamp.
Step 1
Turn off the oven. Wait until
the oven is cold.
Back lamp
Step 1
Turn the glass cover to remove it.
Step 2
Clean the glass cover.
Step 3
Replace the lamp with a suitable 300 °C heat-resistant lamp.
Step 4
Install the glass cover.

13. TROUBLESHOOTING

WARNING!
Refer to Safety chapters.

13.1 What to do if...

In any cases not included in this table please contact with an Authorised Service Centre.
The appliance does not turn on or does not heat up
Problem
You cannot activate or operate the appliance.
The appliance does not heat up.
The appliance does not heat up.
The appliance does not heat up.
Before you replace the lamp:
Step 2
Disconnect the oven from the
mains.
Check if...
The appliance is correctly connected to an
electrical supply.
The automatic switch-off is deactivated.
The appliance door is closed.
The fuse is not blown.
TROUBLESHOOTING
Step 3
Put a cloth on the bottom of
the cavity.
33/40

Advertisement

Table of Contents
loading

Table of Contents