Appendices; List Of Displayed Messages; Error Messages; Other Messages - Roland TD-25 Parameter Manual

Appendices

List of Displayed Messages

Error Messages

Message Meaning
Data Damaged! The data on the USB flash drive is damaged.
Empty Backup! No backup you request on the USB flash drive.
A large amount of MIDI messages were
MIDI Buffer Full! received in a short time, and could not be
processed completely.
No empty backup area There are no empty backup area on the USB
remains. flash drive.
The audio file cannot be played because it is
Song is too long!
too long.
The audio file cannot be played because it is
Song is too short!
too short.
A problem has occurred with the internal
System Error!
system.
System Initialize
Data in the TD-25's memory may be corrupted.
USB drive is too busy. The data could not be read or written in time.
The data on the USB flash drive is damaged.
USB Memory Error!
A USB flash drive the format of which is not
supported by TD-25 has been inserted.
There are no empty space on the USB flash
USB Memory Full!
drive.
USB memory is not
No USB flash drive is in the USB MEMORY port.
connected!
No AUDIO REC Data! No recorded data exists.
The capacity for audio recording is full, and
AUDIO REC Memory Full!
recording has stopped.
AUDIO REC Memory Error! An error occurred during recording.

Other Messages

Action
Do not use this file.
—
Confirm that the external MIDI device
is properly connected. If the problem
persists, reduce the amount of MIDI
messages sent to the TD-25.
Delete unneeded backup.
Play back an audio file that is no larger
than 2 GB.
Play back an audio file that is at least 1
second.
Audio files shorter than 1 second might
not play.
Contact your dealer or a nearby Roland
service center.
Contact your dealer or a nearby Roland
service center.
Use a USB Flash Memory sold by Roland.
Do not use this file.
Format the USB flash drive.
Delete unneeded data.
Insert a USB flash drive correctly.
Use a USB Flash Memory sold by Roland.
–
–
Insert a USB flash drive correctly.
22
Message Meaning
Cannot GROUP MUFFLING. In order for you to turn on the [F2] (GROUP)
Select INSTRUMENT button and adjust the tom muffling for
with same parameter. multiple toms, the muffling parameter of all
(MUFFLING or DECAY) toms 1–3 must be either MUFFLING or DECAY.
Clear current TOMS
The instrument assigned to toms 1–3 is
INSTRUMENT assign, and
cleared, and changes to the preset tom
change to preset assign.
settings.
Press [OK] to Execute.
The modified settings will
The USB Driver settings take effect when you
become effective after
turn the power of the TD-25 off and on again.
power off and restart.
Action
Change the instrument settings so that
the muffling parameter of all toms 1–3 is
set to either MUFFLING or DECAY.
If you want to change to the preset tom
settings, press [F3] (OK). If you decide to
cancel, press [F1] (CANCEL).
Turn the power of the TD-25 off and
on again.