Multi Effect (Mfx) - Roland V-Drums TD-27 Data List

KIT EDIT

MULTI EFFECT (MFX)

You can choose up to three effects from 30 types, and apply these effects to the drum kit.
Parameter
[F1] button (TYPE tab)
–
Type
Level
[F5] button (OFF, MFX1–3 ON)
[F2] button (ASSIGN tab)
MFX Assign
[F5] button (H & R)
[F3] button (SEND tab)
MFX Send Volume
[F5] button (H & R)
[F4] button (DRY+MFX tab)
MFX DRY+WET *1
*1: MFX DRY+WET is specified for each pad. It cannot be specified for individual strike locations (such as the head or rim).
If MFX DRY+WET is set to "MFX ONLY, " some multi-effect settings might cause no sound to be output.
14
Value
MFX1–3
Type of multi-effect
& Refer to "Multi-Effect Parameters" (p. 42).
-INF–+6.0dB
OFF, MFX1–3 ON
MFX1–3
H&R OFF, H&R ON
-INF–+6.0dB
H&R OFF, H&R ON
DRY+MFX
MFX ONLY
Explanation
Select the multi-effect that you want to edit
MEMO
Move the cursor to the MFX1–3 position in the screen, and turn the dial.
Volume of the effect sound for the selected multi-effect
Turns on/off the multi-effect selected.
Select the multi-effect that is applied to each pad.
Specifies whether head and rim of instruments are selected as a set (ON) or independently (OFF).
Effect send level for each pad
Specifies whether head and rim of instruments are selected as a set (ON) or independently (OFF).
The dry sound and effect sound will be output.
Only the effect sound will be output.