Side Shelf - Electrolux EGL4401X Use & Care Manual

SIDE SHELF AND SIDE BURNER
ATTACHMENT
1. Loosen the bolts on the side of
the grill attach the shelf by
allowing the bolt fall through the
large opening in the the keyhole
slots. Then slide the shelves
downward until the bolts are
resting the top of the key hole
slots. Tighten the shelf bolts.
(See Fig. 5)
2. Attach the wires coming out from
the the grill to the ignitor
terminals. (See Fig. 6)
NOTE: It does not matter which wire
goes terminal on the four wire
ignitor
3. Attach the side burner by
allowing the heads to fall
through the large opening
bottom of the keyhole slots.
Then slide side burner downward
until the bolts resting against the
top of the key hole Tighten all of
the side burner bolts.
4. Attach the Flex Line coming from
the the grill to the fitting on the
bottom of Side Burner.
(See Fig. 7)
5. Attach the ignitor wires coming
out side of the grill to ignitor
terminals. (See Fig. 8)
NOTE: It does not matter which wire
goes terminal on the four wire
ignitor

Side shelf

7
Fig. 5
Fig. 6
Attach to fitting
Fig. 7
Fig. 8
Ignitor
wires
hookup