Side Shelf/Side Burner Assembly - Electrolux E57NB60ESS Use & Care Manual

Side Shelf/Side Burner Assembly
SIDE SHELVES ATTACHMENT
1, Loosen the bolts on the side of the grill and
attach the shelf by allowing the bolt heads to fall
through the large opening in the bottom of the
keyhole slots, Then slide the shelves downward
until the bolts are resting against the top of the
key hole slots. Tighten all of the shelf bolts, (See
Fig, 5-6)
Fig. 5
2, Attach the wires coming out from the sides of
the grill to the Igniter terminals, (See Fig, 7)
3, Repeat for second side shelf
Note: It does not matter which wire goes to
which terminal on the three wire igniters.
INSTALLING SIDE BURNER PLATES
1. There are two (2) black burners and caps that
need to be installed for the side burner to operate
correctly.
2, Place the burner and cap on top of the one
burner. (repeat step for second burner.) (See
Fig, 8-10)
3, Replace grate on top of the dual burners.
(See Fig, 11)
Fig. 6
Fig. 7
Fig. l0
Fig. 8
Fig. II Fig. 9