Electrolux EGL4401X Use & Care Manual page 23

Using the Rotisserie & Side Burners
SIDE BURNER LIGHTING
Push and turn the control knob to
the "HIGH"position and immediately
press and hold the electronic ignitor
button. You'll hear a snapping sound.
It may be necessary to hold the
electronic starter button for about 4
seconds. If the burner does not light in
4 seconds, turn the knob to the "OFF"
position and wait 5 minutes before
trying again. Repeat above steps to
light remaining burners. (See Fig. 18)
MATCH LIGHTING
If by chance the electronic ignitor
does not light the burner, the burner
may be lit with a match. Keep your
face as far away from the burner as
possible and place a lit, long stem
match through the spaces in the grate
to the ports of the burner. Position the
match near the burner ports and push
and turn the control knob to the
"HIGH"position.
21
Fig. 18