Electrolux EGL4401X Use & Care Manual page 12

Outdoor grill with electronic ignition
Table of Contents

Advertisement

OUTBOARD IGNITOR PLATE INSTALLATION
The electronic ignitor requires a standard size electrical box, (available at a
local hardware store), with a minimum depth of 6 cm to be mounted in the
structure. It should be placed on the left front or left side of the built-in island,
with the center of the ignitor button no more than ca 10 cm from the Grill. The
ignitor plate (included with the model EGL4401X), fits over the standard electrical
box once mounted in the structure. (See drawing on following page). The ground
wire for the ignitor needs to be grounded to a metal structure in order for the
ignitor to work.
UTILITIES
The optional rotisserie kit requires a 230 volt electric supply and GFI
receptacle, that should be installed by a qualified electrical technician. If your plan
includes a sink, arrange for your plumber to run a water line to the site.
Built-In Instructions
for model EGL4401X
10

Hide quick links:

Advertisement

Table of Contents
loading

Subscribe to Our Youtube Channel

This manual is also suitable for:

Egl4400xEgl3001xEgl3000x

Table of Contents