Before You Begin; Your New Sensor - Emerson Micro Motion ELITE Instruction Manual

Your new sensor

® ®
Micro Motion ELITE Sensor Instruction Manual

Before You Begin

®
Your new Micro Motion ELITE
Coriolis flowmetering system. The other part is a transmitter.
Transmitter connections
The sensor (except CMF300A) is available with two different transmitter
connections:
•
An integral core processor for connecting to a 4-wire remotely mounted
transmitter or to a user-supplied remote host.
•
A 9-wire junction box for connecting to a remotely mounted transmitter,
or to a remotely mounted core processor.
The CMF300A sensor is available only with a remote junction box.
European installations
This Micro Motion product complies with all applicable European
directives when properly installed in accordance with the instructions in
this manual. Refer to the EC declaration of conformity for directives that
apply to this product.
The EC declaration of conformity, with all applicable European
directives, and the complete ATEX Installation Drawings and Instructions
are available on the internet at www.micromotion.com/atex or through
your local Micro Motion support center.
Sensor components
Components of the sensor are illustrated throughout the rest of this
section.
®
sensor (CMF series) is one part of a
1