Cleaning The Corotrons - Xerox DocuColor 7002 User Manual

Maintenance DocuColor 7002/8002

Cleaning the Corotrons

Note
Refer to the video located on the Customer Documentation CD as needed.
The Corotrons should be cleaned every day and after 5,000 prints.
1. Open the Front Doors and slowly pull out the cleaning wand for each corotron fully and
then push the wand back into place.
If it is not seated properly, the User Interface will display the information on the screen. Reseat
the appropriate corotron.
CAUTION
If any problems occur while cleaning the pad or re-seating the wand, and/or if the above screen
is continually displayed, call your Xerox service representative for assistance.
2. After the corotrons are cleaned, follow the prompts on the UI to record the activity.
9-2 User Guide