Stapling Capacity For Different Paper Types And Weights - Xerox DocuColor 7002 User Manual

DocuColor 7002/8002
Staple Position 1
Size:
(Front Corner)
Inches
(mm)
SEF
11x17
(279x
432)
A3
12x18
(305x
457)
12.6x
17.7
(320x
450)

Stapling capacity for different paper types and weights

Following is the staple capacity for various types and weights of paper.
Paper Weight
2
64–80 g/m
2
81–105g/m
2
106–135 g/m
2
136–186 g/m
2
187–220 g/m
2
221–300 g/m
Transparencies
2
* 221 to 300 g/m paper, either coated or uncoated, cannot be stapled. These weights will be
stacked in the Top Tray.
The Offset Stacker/Stapler Tray may be limited to a maximum of 50 staple sets. In order to
avoid system shutdown or jams, ensure that small staple set jobs do not exceed 50 sets. Before
you send a stapled-print job to the machine, enable the offset jobs feature; this will improve
tray capacity.
For information about technical data, refer to the Digital Press Technical Data located in the
Appendix.
User Guide
Staple Position 2
(Rear Corner)
LEF SEF
Coated
50 50
42 42
31 31
26 26
18 18
No * No *
No No
Specifications
Dual Staple
LEF SEF
Uncoated Mix Sizes
No
No
No
No
No
No
No
LEF
11-13