High Capacity Stacker 80 (Hcs80); Bypass Area - Xerox DocuColor 7002 User Manual

How to Clear Jams

High Capacity Stacker 80 (HCS80)

A paper jam in the HCS80 will be indicated by a message on the digital press UI. Follow the
instructions displayed. The image on the HCS80 Control Panel will flash showing the area where
the jam is located.

Bypass Area

Perform the following steps to clear the HCS80 jam in the Bypass area and resume printing.
1. Remove any paper from the Top Tray.
2. Lift the HCS80 Top Cover.
3. Lift the green handle, or handles, indicated on the UI and remove all paper in the Bypass
area. Remove paper only from the areas indicated.
4. Close each green handle.
5. Close the HCS80 Top Cover.
6. If the UI indicates there is a jam in the digital press, follow the instructions on the screen to
remove any paper in the area indicates. Refer to the Jam Clearance section in the Problem
Solving chapter in this manual.
7. Follow the instructions displayed on the digital press UI to resume printing.
4-8
DocuColor 7002/8002
User Guide