Hcs80 Troubleshooting - Xerox DocuColor 7002 User Manual

DocuColor 7002/8002

HCS80 Troubleshooting

If, after following the recommended solutions, the problem persists, call for assistance. The
Fault Codes described below appear on the HCS80 display panel.
Fault Code Cause
212 100 PaperJam
212 110
212 120
212 130
212 140
212 900
212 251 Stacker Problem
212 252
212 253
212 254
212 302 Top Cover open
212 540 Stacker Tray full
212 541 Stacker Tray
position
212 542 No Stacker Cart
212 544 Door open
User Guide
Solution
• A jam occurred during feeding.
• Remove sheets from jam clearance areas.
• Open and close the top cover and front door. A purge
sheet may eject to the top tray.
• If the jam occurs in the second HCS80, be sure to check
the Bypass area in the first HCS80.
Power off, then power on.
Close the Top Cover.
Empty the Stacker Tray.
• Press the Unload button. The Wait light blinks until the
Stacker Tray has reached the down position.
• When the Stacker Tray has reached the down position,
open the front door.
• Remove the Stacker Cart.
• Remove all stacked paper.
• Position the Stacker Cart securely into the HCS80.
• Close the front door.
• Open the front door.
• Remove the Stacker Cart from the HCS80.
• Position the Stacker Cart securely into the HCS80.
• Close the front door
Close the door
Basic Troubleshooting
10-5