Hcs80 Cooling Fan; Unloading The Hcs80 Stacker Tray - Xerox DocuColor 7002 User Manual

Optional Accessories DocuColor 7002/8002

HCS80 Cooling fan

The HCS80 is equipped with a cooling fan that you can switch on and off as required. The
cooling fan is located inside the front door:
2
Only switch on the cooling fan when running paper that weighs 120 g/m (80 lb.) or greater.
Remember to switch off the fan after your job(s) finishes and when running paper that weigh
2
less than 120 g/m (80 lb.).

Unloading the HCS80 Stacker Tray

Use the following procedure to unload the Stacker Tray when it is full, or to retrieve a completed
job.
1. Press the Unload button on the Stacker Control Panel. The Wait light blinks until the Stacker
Tray has reached the down position.
8-4 User Guide