16-1 Command List
Note
A command has a terminator added, that is specified using the "Terminator (Crlf)"
parameter of "Serial interface ( 5if )" in the function table, and is sent to the balance.
Commands to query weight data
C
Q
S
SI
SIR
E
P
S C
Note: The "Q" and "SI" commands, the "S" and "
Commands to control the balance
CAL
EXC *
OFF
ON
P
PRT
R
SMP
T
Z
E
T
S C
U
?ID
?SN
?TN
?PT
PT: ∗∗∗∗∗. ∗
g
Note: The "R", "Z" and "
E
: ASCII code 1Bh
S C
*
: Only for the FZ-i series
16. COMMANDS
Cancels the S or SIR command.
Requests the weight data immediately.
Requests the weight data when stabilized.
Requests the weight data immediately.
Requests the weight data continuously.
Requests the weight data when stabilized.
Same as the CAL key.
Calibration using an external weight
Turns the display off.
Turns the display on.
Same as the ON:OFF key
Same as the PRINT key
Same as the RE-ZERO key
Same as the SAMPLE key.
Tare key
Same as the RE-ZERO key
Same as the RE-ZERO key
Same as the MODE key
Requests the ID number.
Requests the serial number.
Requests the model name.
Requests the tare weight.
Changes the tare weight.
The unit added is the current weighing unit in A&D standard format.
E
T" commands behave the same.
S C
E
P" commands behave the same.
S C
60