Id Number And Glp Report; Setting The Id Number - A&D FX-200i Instruction Manual

11. ID NUMBER AND GLP REPORT

The ID number is used to identify the balance when Good Laboratory Practice (GLP) is used.
The ID number is maintained in non-volatile memory even if the AC adapter is removed.
The GLP output format is selected at "GLP output (info)" of the function table and can be
output to a personal computer or printer using the RS-232C serial interface.
The GLP output format includes the balance manufacturer, model, serial number, ID number
and space for signature for weight data, and the weight used and results for calibration or
calibration test data.
When the AD-8121B is used, the date and time can be printed using the AD-8121B clock and
calendar function. In this case, set the "GLP output ( info )" parameter to "1".
The balance can output the following reports for GLP.
"Calibration report" of the calibration, using the internal mass (Calibration due to changes in
temperature and one-touch calibration.)
"Calibration report" of the calibration, using an external weight.
"Calibration test report" of the calibration test, using an external weight.
"Title block" and "End block" for the weight data.

11-1 Setting the ID Number

1 Press and hold the SAMPLE key until
2 Press the SAMPLE key several times to display id .
3 Press the PRINT key. Set the ID number using the following keys.
SAMPLE key
RE-ZERO key
PRINT key
CAL key
4
Press the CAL key to return to the weighing mode.
Display character set
ba5fnc of the function table is displayed.
To select the digit to change the value. The selected digit blinks.
To set the character of the digit selected. Refer to the display character
set shown below.
To store the new ID number and display
To cancel the new ID number and display ap fnc
50
ap fnc