Selecting The Unit - A&D FX-200i Instruction Manual

Selecting the statistical items to output
5 Press the SAMPLE key to display 5taf 0 .
6 Press the RE-ZERO key to select the output items.
In the example,
number of data, sum, maximum, minimum, range
(maximum-minimum) and average.
Parameter
0
Number of data, sum
Number of data, sum
1
Maximum, minimum, range (maximum – minimum), average
Number of data, sum
2 Maximum, minimum, range (maximum – minimum), average,
Standard deviation, coefficient of variation
7 Press the PRINT key to store the setting.
Note
The statistical calculation mode will be enabled using the
ON:OFF key or when the power is turned on.
8 Press the CAL key to return to the weighing mode.

Selecting the unit

9 Press the MODE key to select the unit to be used for
the statistical calculation mode.
Notes
Selecting the unit using the MODE key is not available after the
data is entered. In this case, clear the data as described on
page 22 and select the unit using the MODE key.
When the unit used for the statistical calculation mode is to be enabled upon power-on,
select the unit in "Unit (Unit)" of the function table beforehand.
5-4-2 Using The Statistical Calculation Mode
Entering data for statistical calculation
Use the following keys to operate the statistical calculation mode.
MODE key ............... When the data is entered, moves between the displaying items (weighing mode,
SAMPLE key.............Turns the minimum weighing value on or off, in the weighing mode.
RE-ZERO key ........... Sets the display to zero in the weighing mode.
PRINT key ................ Outputs the data number and the weight data and includes the weight data to
CAL key .................... Returns to the weighing mode.
5taf 1
is selected to output the
Description
statistical results and data operation) each time the key is pressed.
When no data has been entered, selects the unit.
statistical calculation in the weighing mode. (Output is not in the data format
specified in the function table because of the data number added.)
Outputs the statistical results while the statistical results are displayed. (Output
is not in the data format specified in the function table.)
20