15-1 Command List
Note
A command has a terminator added, that is specified using the "Terminator (Crlf)"
parameter of "Serial interface ( 5if )" in the function table, and is sent to the balance.
Commands to query weight data
C
Q
S
SI
SIR
E
P
S C
Note: The "Q" and "SI" commands, the "S" and "
Commands to control the balance
CAL
EXC *
OFF
ON
P
PRT
R
SMP
T
Z
E
T
S C
U
?ID
?SN
?TN
?PT
PT: ∗∗∗∗∗. ∗
g
Note: The "R", "Z" and "
E
: ASCII code 1Bh
S C
*
: Only for the FZ-CT series
15. COMMANDS
Cancels the S or SIR command.
Requests the weight data immediately.
Requests the weight data when stabilized.
Requests the weight data immediately.
Requests the weight data continuously.
Requests the weight data when stabilized.
Same as the CAL key.
Calibration using an external weight.
Turns the display off.
Turns the display on.
Same as the ON:OFF key.
Same as the PRINT key.
Same as the RE-ZERO key.
Same as the SAMPLE key.
Tare key.
Same as the RE-ZERO key.
Same as the RE-ZERO key.
Same as the MODE key.
Requests the ID number.
Requests the serial number.
Requests the model name.
Requests the tare weight.
Changes the tare weight.
The unit added is the current weighing unit in A&D standard format.
E
T" commands behave the same.
S C
E
P" commands behave the same.
S C
59