Table of Contents
Advertisement
Note
The FXi-02, FXi-08 and FXi-09 can not be used at the same time.
FXi-02 USB interface
(Installed in the balance, Applicable OS: Windows 98 OSR2 or later)
Used to transmit the balance weight data (numerical
value only) uni-directionally to a personal computer
via USB.
Can transmit the balance weight data (numerical
value only) directly to application software such as
Microsoft Excel, Word and memo pad.
Driver installation is not necessary.
Note
To perform bi-directional communication using
WinCT or input statistical data or GLP data to a
personal
computer,
(AX-USB-9P-EX)
FXi-08 Ethernet interface
Used to connect the balance to a LAN.
The "WinCT-Plus" data communication software is
provided as a standard accessory and can perform the
following.
Acquire data from multiple balances connected to a
LAN.
Control these balances with commands.
Acquire data transmitted from balances.
Example: When pressing the PRINT key of the balance,
data is output and is acquired by the computer.
The stored data can be used with Microsoft Excel (if
installed).
FXi-09 Built-in battery unit (Ni-MH rechargeable battery pack)
Charging time: Approximately 10 hours.
Continuous operation hours: Approximately 8 hours
Note
The charging time depends on the operating environment. During charging, the balance is
not available for use.
FXi-10 Small breeze break
Provided for the FZ-i series (all) and FX-120i /200i /300i /500i as a standard accessory. Can be
used for FX-1200i /2000i /3000i /5000i.
19. OPTIONS
use
the
USB
converter
67
FX i –02 Example of use
FX i –08 Example of use
Hide quick links:
Advertisement
Table of Contents
