Sms Events - Siemens SPCK620 User Manual

User programming via the keypad
7
User Menus
7.1.10.2
34
Siemens AB
Security Products
CONTROL ENABLE
SMS CALLER ID
SMS PIN CODE
DELETED
COMMANDS ALLOWED
Beyond user type, Engineer settings allow specific rights for functionality to be
granted to each user. If a function explained herein does not appear on user
keypad menus, the user does not have permission for that functionality. Consult
with authorised installation Engineer for appropriate rights and settings.

SMS EVENTS

To receive event notifications, SMS setup must have the phone number; the
number must be enabled for SMS; the events must be toggled for SMS Event
notification.
There is a maximum of four users for SMS configuration on one panel and user
may set a maximum of 5 phone numbers for SMS receipt.
Adding a phone number
To add a phone number for SMS use:
1. Scroll to SMS EVENTS and press SELECT.
2. Scroll to ADD NUMBER and press SELECT.
 The LCD displays SMS NUMBER.
3. Enter a phone number and press ENTER.
 The LCD displays UPDATED.
4. Press BACK to exit
Enabling a phone number
To enable a phone number for SMS [receipt]:
1. Scroll to SMS EVENTS and press SELECT.
2. Scroll to EDIT NUMBER and press SELECT.
3. Scroll to the appropriate registered number and press SELECT.
4. Scroll to ENABLE NUMBER and press SELECT.
5. Press SELECT for ENABLED [Alternatively, press SELECT for DISABLED.]
6. Press BACK to exit the SMS EVENTS menu.
Enable or disable SMS Control.
Provide phone number (requires 3-digit country code prefix)
Provide pin number
Remove phone number as required.
Select the functions that can be performed via SMS. See SMS
Commands [➙ 35] for a list of SMS commands to perform these
functions.
A6V10271018
26.09.2011